新聞動态
模具企業如何穩定快速的發展
隔離墩模具特别是熱固性塑料模具的型腔部分大都必須進行熱處理。這就要求鋼材具有較好的淬透性和很小的變形。一般熱塑性塑料成形用模具,采用調質、預硬化等處理即可。而熱固性塑料成形用模具則必須淬硬。鋼模具的凹型腔時常采用放電加工,放電加工後表面的硬化層要淺,以便于抛光。抛光在隔離墩模具的型腔加工中是最耗時間的。時間長則增加成本。目前對自動抛光的技術尚未達到實用階段,仍然以手工抛光為主。硬化層厚則抛光工時增大。
Most of the cavity parts of the die of the isolating pier, especially the thermosetting plastic mold, must be heat treated. This requires that the steel has good hardenability and very small deformation. In general, the mould for plastic plastic forming is used, such as quenching and tempering, pre hardening and so on. The mould for thermosetting plastic forming must be hardened. Discharge machining is www.weishengzhii.cn www.gaibanmoju.com.cn www.canjinzhiji.cn www.guixinguan.com.cn www.bolimian.net.cn www.zhutongdiaosu.com.cnoften used in the concave cavity of steel die, and the hardened layer of the surface after discharge machining is shallow to facilitate polishing. Polishing is the most time-consuming process in the machining of the mold cavity of the isolating pier. The length of time increases the cost. At present, the technology of automatic polishing has not reached the practical stage, and it is still based on manual polishing. The hardened layer is thickened and the polishing time increases.
國産隔離墩模具國内市場滿足率一直不足74%,其中大型、精密、長壽命模具滿足率更低。目前工業發達國家的模具正在加速向中國轉移,國際采購越來越多。市場需求旺盛,生産發展一時還難以跟上,供不應求的局面還将持續一段時間。注塑模具企業不但要重視産品的研發,同時更要重視産品的創新。隻有企業在技術人才、技術創新方面要具有雄厚的實力,同時能夠在第一時間内準确把握客戶的個性化需求,企業才能穩定飛速的發展。
Domestic market rate of domestic market has been less than 74%, of which large, precise, long life die satisfaction rate is lower. At present, the moulds of industrial developed countries are accelerating to shift to China, and more and more international purchases are being made. The market demand is exuberant, the production and development are still difficult to keep up, and the situation in short supply will continue for some time. The injection mold enterprise should not only pay attention to the research and development of the product, but also pay more attention to the innovation of the product. Only when enterprises have strong strength in technology and technological innovation, can we accurately grasp the individual needs of customers in the first time, and enterprises will develop steadily and rapidly.

聯系方式

  1. 名稱:優質隔離墩模具廠
  2. 手機:13313028229
  3. 郵箱:xx
  4. 地址:xx

版權 © 優質隔離墩模具廠 網址:http://www.juhua482866.cn  推薦:隔離墩模具,水泥隔離墩模具,公路隔離墩鋼模具

網站建設及優化保定遨遊網絡公司

http://m.juhua482866.cn|http://wap.juhua482866.cn|http://www.juhua482866.cn||http://juhua482866.cn